Targeted germ control on the schedule you need. We focus on knobs, rails, switches, shared devices, and other contact points to reduce spread and support wellness.

High-Touch Disinfection Commercial Cleaning in Metro Detroit

Targeted Germ Control for the Surfaces People Touch Most

Door pulls, elevator buttons, rails, badge readers, phones, tablets, fridge handles, and shared controls are touched hundreds—sometimes thousands—of times each day. Without a defined plan, these contact points quietly drive absenteeism, complaints, and poor guest experiences. Maven Commercial Cleaning’s High-Touch Disinfection program delivers a documented, repeatable cadence of targeted disinfection for offices, medical suites, schools, fitness centers, showrooms, and industrial campuses across Detroit, Southfield, Novi, Troy, and throughout Macomb, Oakland, and Wayne counties.

What Counts as “High-Touch” (and How We Treat It)

We start with an on-site walk-through—never virtual—to list your building’s specific contact points by zone and risk level. Then we build a frequency plan that blends fast daytime loops with after-hours resets so touchpoints stay consistently safe.

Entry & Movement Surfaces
- Door pulls, push plates, crash bars, handrails on stairs and ramps
- Elevator call plates, cab buttons, handrails, card readers
- Reception counters, pens, stylus pads, visitor kiosks (low-moisture, device-safe methods)
Work & Collaboration Touchpoints
- Conference tables, chair arms, remotes, AV touch panels, HDMI hubs
- Hot-desk peripherals: shared keyboards, mice, docking stations, and phones (per policy)
- Copy/print areas: control panels, lids, and worktops; mail/supply cabinet pulls
Breakroom & Shared Amenity Surfaces
- Fridge and microwave handles, vending fronts, water dispensers, coffee stations
- Counters, appliance knobs, sink levers
- Towel/sanitizer dispenser housings and sight windows
Special Environments
- Medical/clinical admin areas: check-in counters, arm rests, pens, partitions
- Childcare: tabletops, chair backs, toy bins (rotation-safe), changing station guards
- Fitness: cardio touchscreens, adjustment levers, bench pads, studio props
- Tech suites: badge pads, access keypads, rack handles (strict low-moisture protocol)

Cadence: The Right Frequency for the Right Risk

Not every surface needs the same pace. We categorize zones by traffic, dwell time, and vulnerability:

Tier 1 (High Risk/High Traffic): Entrances, elevators, reception counters, breakroom handles, restroom doors.
- Frequency: Multiple daytime passes (via Day Porter) + after-hours reset.
Tier 2 (Moderate Risk/Moderate Traffic): Conference rooms, collaboration spaces, copy/print areas.
- Frequency: Daily after-hours + between-meeting micro-resets as scheduled.
Tier 3 (Targeted/Low Traffic but Sensitive): Technology suites, certain medical admin areas.
- Frequency: Daily device-safe pass + situational disinfection tied to access logs or change windows.

All frequencies are documented on digital checklists with time stamps for auditability.

Methods & Chemistry That Protect People and Surfaces

Disinfection is only “clean” if it’s material-safe and properly applied. We pair EPA-listed disinfectants with the right tools and dwell times:

Device-Safe, Low-Moisture techniques for electronics, badge pads, kiosks, and AV panels.
Residue-controlled wipes and microfiber for metals, laminates, and coated surfaces (no sticky film).
pH-appropriate approaches for stone, glass, and acrylic (anti-static, ammonia-free for acrylic to prevent crazing).
Fragrance-free or low-VOC options upon request for scent-sensitive environments.

We train our uniformed W-2 team in chemical handling, dwell-time compliance, PPE, bloodborne pathogen awareness, and slip/fall prevention (because wet disinfectant on a push plate shouldn’t end up on the floor).

Daytime Loops + After-Hours Resets

Your facility stays safest when touchpoints are addressed while people are using them and again after they leave:

Day Porter Loops (5–15 minutes/zone): Fast, polite passes through Tier-1 areas (doors, elevators, breakrooms) with minimal disruption.
Between-Meeting Micro-Resets: Wipe conference tables, chair arms, remotes, touch panels, and door hardware before the next group enters.
After-Hours Reset: Thorough building-wide disinfection of documented touchpoints, plus restrooms, breakrooms, and shared devices per policy.

Measurable Consistency (Without Guesswork)

Digital checklists by zone with time-stamped completion and notes (e.g., “added second noon loop during flu surge”).
Supervisor inspections focused on repeat smudge points and missed micro-zones (elevator inner jambs, underside pulls).
Issue log to track patterns (e.g., recurring contamination on café door pulls) and adjust cadence or signage.
Quarterly reviews to right-size seasonal coverage and align with occupancy changes.

Metro Detroit Seasonality: Scale When It Matters

Winter: More loops for salt-season doors and elevator rails, plus enhanced disinfection during cold/flu spikes.
Spring: Pollen/dust increase—pair device-safe disinfection with vent and grille dusting to reduce fallout on touchpoints.
Summer: Odor control in breakrooms; sweat-prone fitness handles get added passes.
Fall: Back-to-routine surge + pre-holiday visitor traffic—add micro-resets in lobbies and conference clusters.

Integrations That Multiply Results

High-Touch Disinfection is most effective inside a layered program:

Day Porter Service: Real-time touchpoint care during open hours.
Scheduled Janitorial: Nightly resets for floors, trash, glass, and general surfaces.
Scheduled Deep Cleaning: Quarterly carpet extraction, baseboard detailing, vent/lens dusting—removing reservoirs that re-soil touchpoints.
Security & Entrance Programs: Fingerprint control at the curb and door so interior contact points stay cleaner longer.

Compliance, Safety & Transparency

We respect your access controls, privacy requirements, and device policies. For healthcare, childcare, and government/critical sites, we align with enhanced protocols you approve during onboarding. If outbreaks occur (flu, norovirus), we temporarily escalate Tier-1 frequencies and communicate changes to your team.

Why Metro Detroit Chooses Maven

Local, responsive, reliable coverage across Macomb, Oakland, and Wayne counties.
Fully vetted, uniformed W-2 employees—not revolving unknowns near your staff and guests.
On-site quotes and transparent, line-item scopes mapped to your specific touchpoints.
A “Truly Clean” standard focused on health, presentation, and accountability—with documentation to prove it.

Get a Targeted Disinfection Plan & On-Site Quote

Show us your busiest doors, most-used meeting rooms, and hot-zone appliances. We’ll visit your property, map touchpoints by risk tier, and deliver no-obligation pricing with a cadence that fits your operations and budget.

FAQs

How often should we disinfect during normal (non-outbreak) conditions?
Tier-1 touchpoints typically get 2–4 daytime loops plus an after-hours reset. Tier-2 areas (conference/collab) get daily resets and micro-turnovers between meetings. We’ll set exact cadence after an on-site assessment of traffic and risk.

Will frequent disinfection damage finishes or electronics?
Not with the right products and methods. We use device-safe, low-moisture techniques on electronics and material-compatible chemistries on metals, laminates, and stone. Your finishes are documented so every visit uses the correct approach.

Can you scale up temporarily during flu season or outbreaks?
Absolutely. We can increase loop frequency, add Day Porter coverage, and expand Tier-1 zones (e.g., add copy/print controls) for a defined period. When the surge passes, we revert to your standard cadence—no long-term disruption.

Serving Detroit, Southfield, Novi, Troy, and nearby communities, Maven Commercial Cleaning keeps the most-touched surfaces in your building cleaner, safer, and consistently documented—so people stay healthy and your operation runs smoothly.